- Home
- Surveillance & Security
- Access Control
- Readers
- Access Control Readers
- Paxton Net2 proximity MIFARE® reader – P50 – 353-467
Paxton Net2 proximity MIFARE® reader – P50
Paxton Net2 proximity MIFARE® reader – P50
MPN 353-467
Item no. W126723706
EAN/UPC 5055169510025
Stock level
About – The Proximity P series MIFARE® reader is suitable for use with Net2 systems. The reader is multi-format and can be used with a choice of access tokens including MIFARE®Classic protocol ISO 14443A. It can also be used with EM4100 and Paxton Net2 tokens.
The reader is supplied with a choice of black or white fascias. Other colours are available. Replacement fascias are available to Paxton registered installers free of charge.
MIFARE and MIFARE Classic are trademarks of NX...
Multi-format P50 reader
Reads MIFARE® tokens
Reads EM4100 tokens
Reads Net2 tokens
A choice of black or white fascias
Low profile - less than 16mm deep
Specifications for 353-467
Package dimensions
Depth (package,cm)
19 cm
Gross Weight (Package, kg)
0.35 kg
Height (package,cm)
5.5 cm
Width (package,cm)
17.5 cm
Product dimensions
Net Weight (Product, kg)
0.33 kg
Product Depth
19 cm
Product Height
5.5 cm
Product Width
17.5 cm
Technical details
Access chip/card reader
Yes
Authentication type
Access chip/card
LED indicators
Status
Product colour
Black/White
Recommended usage
Indoor & outdoor
Type
Basic access control reader
Vendor information
Brand Name
Description
Net2 proximity MIFARE® reader – P50
About – The Proximity P series MIFARE® reader is suitable for use with Net2 systems. The reader is multi-format and can be used with a choice of access tokens including MIFARE®Classic protocol ISO 14443A. It can also be used with EM4100 and Paxton Net2 tokens.
The reader is supplied with a choice of black or white fascias. Other colours are available. Replacement fascias are available to Paxton registered installers free of charge.
MIFARE and MIFARE Classic are trademarks of NXP B.V
Installation – The reader is wired as shown on the control unit label. Be sure to avoid mounting on metal surfaces or near other proximity readers as this will affect the read range. The cable exits centrally from the back of the reader making drilling and mounting very accurate.
Operation – A token is read by holding it within close proximity of the reader. Once a token has been read the control unit looks up the access permissions of that user. Access is then granted or denied as appropriate. If access is granted the green LED flashes. If access is denied the red LED flashes.
Documents
*The product data above is provided by Icecat. Oprema cannot be held responsible for errors in relation to this.