- Home
- Surveillance & Security
- Access Control
- Readers
- Access Control Readers
- Paxton Proximity keypad – KP50 – 355-110
Paxton Proximity keypad – KP50
Paxton Proximity keypad – KP50
MPN 355-110
Item no. W126723707
EAN/UPC 5060057457047
OEM 2751
Stock level
About – KP readers are a keypad and a proximity reader all in one. This allows card plus PIN (or code) access control with a single reader. KP readers are for use with Switch2 and Net2 systems. The readers are supplied with a choice of black or white bezels. Additional colours are available to Paxton registered installers free of charge.
Installation – The reader is wired as shown on the control unit label. Be sure to avoid mounting on metal surfaces or near other proximity readers as thi...
Use with Switch2 or Net2
Keypad and proximity reader all in one
Range up to 100mm with PROXIMITY cards
Easy mounting
Black or white bezels
Low profile - less than 16mm deep
Specifications for 355-110
Display
Built-in display
No
Package dimensions
Depth (package,cm)
19 cm
Gross Weight (Package, kg)
0.329 kg
Height (package,cm)
5.5 cm
Width (package,cm)
17.5 cm
Product dimensions
Product Height
10 cm
Product Width
5 cm
Technical details
Access code reader
Yes
Authentication type
Password
Backlight
Yes
Keypad illumination
Yes
Keypad integrated
Yes
LED indicators
Status
Product colour
Black, Grey
Recommended usage
Indoor & outdoor
Type
Basic access control reader
Vendor information
Brand Name
Description
Proximity keypad – KP50
About – KP readers are a keypad and a proximity reader all in one. This allows card plus PIN (or code) access control with a single reader. KP readers are for use with Switch2 and Net2 systems. The readers are supplied with a choice of black or white bezels. Additional colours are available to Paxton registered installers free of charge.
Installation – The reader is wired as shown on the control unit label. Be sure to avoid mounting on metal surfaces or near other proximity readers as this will affect the read range. The cable exits centrally from the back of the reader making drilling and mounting very accurate.
Operation – A token is read by holding it within close proximity of the reader. Once a token has been read if the reader has been configured for code/PIN this must then be entered using the keypad. The control unit verifies the information and grants or denies access as appropriate. If access is granted the green LED flashes. If access is denied the red LED flashes.
Documents
*The product data above is provided by Icecat. Oprema cannot be held responsible for errors in relation to this.